Decals arrive ready to apply. Step-by-step instructions are below. Our decals ship with a small practice decal so that you can be sure to get a smooth application of your purchased design.
*Our vinyl is permanent, not intended for repositionable use.
Font choices for monograms (click to view larger):
Apply your decal in four simple steps:
 |
| Decals arrive sandwiched between a sheet of transfer tape and a protective backing. The transfer tape is the transparent layer on the top surface of the decal. The backing is the white, smooth surface on the back of the decal. Keep the decal protected like this until immediately before application. |
 |
| Step 1: Carefully peel the transfer tape away from the backing. |
 |
| The image will stay attached to the transfer tape. |
 |
| Step 2: Lightly position the center of the decal in the desired position. Then smooth each side down, from the center outward. |
 |
| Step 3: Use a credit card or similar device to press the decal firmly to the surface, smoothing out any air pockets as best as possible. |
 |
| Step 4: Peel away the transfer tape, leaving the decal in place. |
 |
| All done! |
